Request a quote
Your cart
There are no more items in your cart
Cat 6A 4x2xAWG24 LSZH White AMP NetConnect patch cord in several measures. Standard lengths are:
- 0.5 meters
- 1 meter
- 2 meters
- 3 meters
- 4 meters
- 5 meters
- 6 meters
- 7 meters
- 8 meters
- 9 meters
- 10 meters
- 15 meters
- 20 meters
- 25 meters
- 30 meters
- 35 meters
- 40 meters
- 45 meters
- 50 meters
- 60 meters
- 70 meters
- 80 meters
- 90 meters
- 100 meters
Available colors:
- Red UTP Ethernet cable
- UTP Ethernet cable Amarillo
- Blue UTP Ethernet cable
- UTP Ethernet cable Gray
- UTP Ethernet Cable Green
- White UTP Ethernet cable (Cat6 and Cat6A / 7)
Materials certified and guaranteed performance up to 10Gbps on UTP cable.
The new transmission standards EIA / TIA 568B (ISO / IEC 11801: 2002) for high frequencies, providing quality materials, certified and tested with devices and methods according to the standard is the only guarantee of a return on investment in network electronics last generation.
The Ethernet twisted pair cable consists of eight single copper wires with PVC insulation, interwoven by helically pairs. These cables are coated shielded (if applicable) and coating PVC cover halogen free.
The behavior of two parallel wires on running a current with a certain frequency causes the generated waves are canceled due to braiding.
Due to this interlocking arrangement, the interference between the inner and outer pairs are minimal.
Color coding drivers allow their identification, the standard uses four colors: orange, green, brown and blue; combined with white to complete the remaining four and make up couples.
The wires offered are:
- UTP (Unshielded Twisted Pair): pairs without shielding widely used in local networks because of its low cost and easy to use. They are not recommended for long-range networks.
- STP (Shielded Twisted Pair): pairs with common shielding mylar mesh used in local networks. Recommended for long-range local networks. Its impedance is 150 ohms.
- FTP (Foiled Twisted Pair): pairs shielded in pairs mylar mesh used in local networks. Recommended for long-range local networks. Its impedance is 120 ohms.
The twisted pair cables 24 Cables meet the specification 568A EIA / TIA.
|
Category |
Bandwidth (MHz) |
Applications |
characteristics |
|
Cat. 5e |
100 MHz Class D |
100BASE-TX and 1000BASE-T Ethernet |
Improved Category 5 cable is in practice as the previous category but with better test standards. It is suitable for Gigabit Ethernet |
|
Cat. 6 |
250 MHz Class E |
1000BASE-T Ethernet |
Transmits to 1000Mbps. |
|
Cat. 6A |
250MHz 500MHz class E |
10GBASE-T Ethernet |
|
|
Cat. 7 |
1000 MHz Class F |
Cable U / FTP 4 pair. |
